[data-custom-field-main-container] { flex-direction:column } [data-zs-customfield-container] { display:flex; gap:10px } [data-custom-field-main-container] [data-variant-id]{ width:100% !important } @media(max-width:768px){ [data-zs-customfield-container]{ flex-direction:column } }
SD CARD READER MODULE-AR-333-D

SD CARD READER MODULE-AR-333-D

Non-returnable
₹180.00
Buy SD Card Reader Module online for seamless data transfer and storage expansion. Ideal for microcontrollers, Arduino, and Raspberry Pi projects. Shop now for reliable performance.
SPQ
1
MOQ
1
Visible Manufacture Name
Microadapt
Visible Manufacturer’s code
MA570050
Weight (gm)
0.01
Brand/MFR No
Microadapt-MA570050
Quantity
Add to Cart
Product Details

Storing data is one of the most important parts of every project. There are several ways to store data according to the data type and size. SD CARD READER MODULE are one of the most practical ones among the storage devices, which are used in devices such as mobile phones, minicomputers and etc. The SD and micro SD card modules allow you to communicate with the memory card and write or read the information on them. The module interfaces in the SPI protocol.


Get the high-qualitSD Card Reader Module at the best price in India.

SD Card Reader Module Features

  • The level conversion circuit board that can interface level is 5V or 3.3V support micro SD card, micro SDHC card (high-speed card)
  • Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
  • Communication interface is a standard SPI interface
  • 4 M2 screw positioning holes for easy installation
  • Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin
  • Level Conversion Circuit: Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal
  • Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin

To know more about all latest Products of  Arduino Shield Module you can visit at  www.campuscomponent.com

Items have been added to cart.
One or more items could not be added to cart due to certain restrictions.
Added to cart
- There was an error adding to cart. Please try again.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.