Espressif Systems ESP32-S2-Saola-1RI-WI-1512-D
ESP32-S2 general-purpose development board, based on ESP32-S2-WROVER-I, with 4 MB flash and pin header.ESP32-S2-Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2-Saola-1 on a breadboard.
ESP32-S2-WROVER | ESP32-S2-WROVER is a powerful, generic Wi-Fi MCU module that integrates ESP32-S2. It has a PCB antenna, a 4 MB external SPI flash and an additional 2 MB PSRAM. |
Pin Headers | All available GPIO pins (except for the SPI bus for flash and PSRAM) are broken out to the pin headers on the board. Users can program ESP32-S2 chip to enable multiple functions such as SPI, I2S, UART, I2C, touch sensors, PWM etc. |
3.3 V Power On LED | Turns on when the USB power is connected to the board. |
USB-to-UART Bridge | Single USB-UART bridge chip provides transfer rates up to 3 Mbps. |
Reset Button | Reset button. |
Micro-USB Port | USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-S2 chip. |
Boot Button | Download button. Holding down Boot and then pressing Reset initiates Firmware Download mode for downloading firmware through the serial port. |
RGB LED | Addressable RGB LED (WS2812), driven by GPIO18. |
